Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.
Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
 Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




Building Regulations and Standards: Hygroscopic materials and bathroom extractor fan...

Bottom of Page

1 to 12 of 12

  1.  
  1.  
    Dear Those Who Know, We are nearing completion of our strawbale/roundwoood timber studio - Our bathroom has a generously sized double window - we have used lime plaster, have an earthen floor and timber with sheepswool insulation in ceiling above bathrrom. We have one small slipper bath, no toilet and a basin. We don't want retrofit an extractor fan through a plastered strawbale wall in having deliberately chosen materials that will absorb and release vapour. Could you please advise whether there's a way around this building regs. requirement?
  2.  
    Does your generously sized double window have an opening light? If so surely this will suffice for ventilation, if there is no opening light can one be fitted - even if it is never opened. I might be out of touch but opening windows were always deemed adequate ventilation.
    Peter
    • CommentAuthortony
    • CommentTimeApr 18th 2011
     
    the only way round building regs is to fit a whole house ventilation system.

    Fit a fan inside and a grille outside with no hole joining them :thumbup:
    •  
      CommentAuthordjh
    • CommentTimeApr 18th 2011
     
    The current part F requires 'extract ventilation'. Windows don't qualify because the wind can blow in rather than out. You can use a passive stack instead of mechanical ventilation and obviously a mechanical vent can go through the ceiling/roof or window rather than the wall. But that's about it as far as I know.
    • CommentAuthormarktime
    • CommentTimeApr 18th 2011
     
    "Fit a fan inside and a grille outside with no hole joining them "

    Anarchy Rules! Love it!:bigsmile:
    • CommentAuthorfclauson
    • CommentTimeApr 18th 2011
     
    but that would not get rid of the fumes, smells, and other nasties (excluding moisture) !!:cry:
    •  
      CommentAuthorjoe90
    • CommentTimeApr 18th 2011
     
    fclauson, read original post, no toilet!!!!
  8.  
    Thank you all, I knew I could rely on your experience and erudition. Our way ahead is clear and of course we won't say what our decision is!
  9.  
    Do BCO's read this forum?:peace:
    • CommentAuthorCWatters
    • CommentTimeApr 20th 2011 edited
     
    Posted By: tonyFit a fan inside and a grille outside with no hole joining them


    :bigsmile::bigsmile::bigsmile::bigsmile:
    •  
      CommentAuthorSteamyTea
    • CommentTimeApr 21st 2011 edited
     
    Posted By: gustyturbineDo BCO's read this forum?

    They cant read :wink:
    • CommentAuthormrsherbie
    • CommentTimeOct 7th 2011 edited
     
    Hi Carol, we are just installing 5 of these right now in our detached new build oak frame with fully open inside warm roof:
    http://www.passivent.com/passive_stack_ventilation.html

    Non powered, zero maintenance, very simple and very clever, it has been a learning curve, and not totally straightforward compared to a house build with a 'loft' but it happily meets new build regulations and best of all, no noisy fans coming on every time you go into a bathroom! or unsightly plastic vents on exterior of house walls. I am thinking from your style of build that you are in the same mindset as me.. I HATE plastic and aside from these vents and the smoke & carbon monoxide detectors (inside the house that I am going to camouflage the covers to match the natural wood they are mounted on) we have NO white plastic anywhere on show :bigsmile:

    We have bought our roof tiles from Keymer to get round the passivent colour matched resin ridge tile issue that I posted on another thread. Keymer have attached their own handmade clay tiles to the plastic ridge system.
    http://www.keymer.co.uk/products/Ventilation%20Range/

    Also it is a very easy to fit total clip together kit system. An easy DIY job should you want to.

    Anna :bigsmile::wink:

1 to 12 of 12

  1.  
Add your comments

    Username Password
  • Format comments as
 
Back to Discussions Top of Page
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press