Home  5  Books  5  GBEzine  5  News  5  HelpDesk  5  Register  5  GreenBuilding.co.uk
Not signed in (Sign In)

Categories



Green Building Bible, Fourth Edition
Green Building Bible, fourth edition (both books)
These two books are the perfect starting place to help you get to grips with one of the most vitally important aspects of our society - our homes and living environment.

PLEASE NOTE: A download link for Volume 1 will be sent to you by email and Volume 2 will be sent to you by post as a book.

Buy individually or both books together. Delivery is free!


powered by Surfing Waves




Vanilla 1.0.3 is a product of Lussumo. More Information: Documentation, Community Support.

Welcome to new Forum Visitors
Join the forum now and benefit from discussions with thousands of other green building fans and discounts on Green Building Press publications: Apply now.




    •  
      CommentAuthorSteamyTea
    • CommentTimeDec 25th 2010 edited
     
    I bank on the air movement to heat upstairs. In 5 years I have never had to have the heating on up there. One storage heater in the living room and a fan heater in the kitchen does it all. Front of house does get a lot of sun in the winter though. Depends on size and shape of house I guess.
    • CommentAuthorgcar90
    • CommentTimeJan 2nd 2011
     
    Here is a nice little bit of details with rigid boards and glass wool :bigsmile:
      IMG00352-20101230-1313.jpg
  1.  
    Tundishes, wind fairly whistles up my overheat pipe to outside :)

    Let's vote.
    • CommentAuthorbrig001
    • CommentTimeJan 3rd 2011
     
    I suppose that external overflows on toilets can be added to that one.
  2.  
    I think what it actually means is that we've reached the very, very end of the list.
    • CommentAuthortony
    • CommentTimeJan 5th 2011
     
    Final update

    may be we could vote them into worst first order soon?

    Cavity walls
    Blob and dobbed walls
    Ventilated underfloor voids, Un-insulated ground floor concrete floor slabs
    Party walls
    Integral garages or porches
    Extractor fans, Trickle vents or
    First floor voids & Dormer bungalow first floor voids
    Letterboxes and/or Cat flaps
    Sliding sash windows, Crittal windows, Bay windows,Single glazed windows
    Open flues & combustion air bricks
    Soil and vent pipe casings and all badly-done service penetrations.
    Ventilated chimneys
    Thermal bypass in warm roof at gable & eaves roof-wall junctions, Gable walls
    Dormer windows
    Badly fitted floorboards and door frames
    Heated conservatories
    Lintels
    Loft hatch
    Opening windows every morning to get rid of the condensation
    Cold water cisterns - the loo one if not the CW tank - importing cold water which gets warmed up by the house interior before being flushed away warm.
    Drying clothes indoors, Drying logs indoors, defrosting foods, etc
    Radiators on external walls, Curtains that drape over your rads
    Balconies, cantilevers, etc hat bridge insulation
    Open plan and missing internal doors and/or overly high ceilings
    Overflow pipes
  3.  
    How about the very common , Leaving windows open for fresh air at night (or day)

    One of my regular customers says she loves fresh air , windows always open a bit and thermostate set to 21+ C
    heating pumping 24/7 .
    I've tried explaining about relative thermal comfort and draughts several times to no avail.
  4.  
    Too late James, he said final update! Anyway your suggestion is mostly covered earlier on. How about we each vote our worst 3, with weighted votes of 3,2 and 1? The only question being whether we whisper our votes to avoid tactical voting! What do you say Tony?
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 5th 2011 edited
     
    Could set up an online survey, there are enough free ones about, that way get a graph and everything.

    Just an example:

    http://questionform.com/
    • CommentAuthortony
    • CommentTimeJan 6th 2011
     
    OK you do it then I am hoping that we will do it on here and have asked --- ed?
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 6th 2011
     
    Think I have
    Vote your least favourite (1) and we can filter the list down.

    http://FreeOnlineSurveys.com/rendersurvey.asp?sid=jx2n1rk6ka4klol854814
    • CommentAuthorStuartB
    • CommentTimeJan 6th 2011
     
    Note - you have to answer ALL questions. Also it asks you to sign up at the end for some promo stuff but I just shut my browser so hopefully it saved my answers.
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 6th 2011 edited
     
    Shall have a look and see if it has some results. Never used this service so we are all learning it a bit.

    Yes one lot of figures, so seems to be working.

    In case you miss it here is the link to the initial survey. This is to get rid of the least offensive and then I can narrow it down.

    http://FreeOnlineSurveys.com/rendersurvey.asp?sid=jx2n1rk6ka4klol854814
    •  
      CommentAuthorDamonHD
    • CommentTimeJan 6th 2011
     
    I'm too stupid to understand the double negatives.

    Does '5' mean I think it's a really bad thing that ought to be banned, or a really good thing that we ought to have more of?

    Rgds

    Damon
    • CommentAuthorseascape
    • CommentTimeJan 6th 2011
     
    I'm confused too. Are we voting for the 'best' winter cooling system - the one that loses the most heat, causes the most cooling? In my case, I would have to give crittell windows top marks of 5 - even though I really want to give them D minus.
    •  
      CommentAuthorjonharris
    • CommentTimeJan 6th 2011
     
    Same here, was about to vote but the wording confused me also.
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 7th 2011 edited
     
    If you really hate it then give it a 1
    If you think it is not that bad give it a 5
    If you unsure somewhere in between.

    When enough people have voted I can see the least popular, or the ones that people really hate, and put them up for another vote and so on until we find the one that is hated the most.
    You are not voting for the outright winner here, should have made that clearer at the start but I did spend all of 10 minutes on it.
    Take it we are not fans of PR. "We have the worst democracy in the world, apart from everyone else's"
    http://FreeOnlineSurveys.com/rendersurvey.asp?sid=jx2n1rk6ka4klol854814
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 8th 2011
     
    Only had 7 responses and that is really not enough to filter the list. If you get time put your choices in,

    http://FreeOnlineSurveys.com/rendersurvey.asp?sid=jx2n1rk6ka4klol854814
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 11th 2011
     
    Not much interest, but this is what 8 of you said. You can copy and paste it into a spreadsheet and play to your hearts contents.

    1( Worse) 2 (pretty bad) 3 (middle) 4 (not quite so bad) 5 (least worse)
    Cavity walls 4 0 1 2 1
    Blob and dobbed walls 2 1 3 1 1
    Ventilated underfloor voids, Un-insulated ground floor concrete floor slabs 3 1 2 2 0
    Party walls 0 2 3 2 1
    Integral garages or porches 1 1 4 1 1
    Extractor fans, Trickle vents 0 3 3 2 0
    First floor voids & Dormer bungalow first floor voids 0 0 2 4 2
    Letterboxes and/or Cat flaps 1 1 3 2 1
    Sliding sash windows, Crittal windows, Bay windows,Single glazed windows 1 4 1 2 0
    Open flues & combustion air bricks 4 2 1 1 0
    Soil and vent pipe casings and all badly-done service penetrations. 2 3 3 0 0
    Ventilated chimneys 1 3 2 2 0
    Thermal bypass in warm roof at gable & eaves roof-wall junctions, Gable walls 0 2 1 2 3
    Dormer windows 0 1 3 4 0
    Badly fitted floorboards and door frames 2 4 1 1 0
    Heated conservatories 2 3 2 0 1
    Lintels 1 1 3 0 3
    Loft hatch 0 2 3 2 1
    Opening windows every morning to get rid of the condensation 1 1 2 2 2
    Cold water cisterns - the loo one if not the CW tank - importing cold water which gets warmed up by the house interior before being flushed away warm. 0 1 3 1 3
    Drying clothes indoors, Drying logs indoors, defrosting foods, etc 1 1 1 2 3
    Radiators on external walls, Curtains that drape over your rads 1 1 1 1 4
    Balconies, cantilevers, etc hat bridge insulation 0 2 1 3 2
    Open plan and missing internal doors and/or overly high ceilings 2 0 1 3 2
    Overflow pipes 0 1 0 3 4
    • CommentAuthorStuartB
    • CommentTimeJan 11th 2011
     
    ST - how come only 5 responses for each one? Also why zero for some?
    •  
      CommentAuthorSteamyTea
    • CommentTimeJan 11th 2011
     
    It is the weighting, which I have not bothered to do as this is not my thread.

    Anything in the first numeric column (other than the very first) is the least favourite, so taking 'Party Walls' no one thought they were that bad, whereas Cavity Walls and open flues/Combustion Bricks were considered really bad.

    I was hoping for more responses as with only 8, nothing can really be worked out from it.

    Maybe the way to do it is to start with 3 categories, Convection, Radiation and Conductance and work on them.
    • CommentAuthortony
    • CommentTimeJan 22nd 2011 edited
     
    <blockquote><cite>Posted By: Viking House</cite>I tested the temperature of a few stoves in clients houses that weren't lighting, they showed temperatures of around 10-11 degrees in cold weather, so when the stove isn't lit these rooms tend to be the coldest in the house because the stove acts like a cold radiator. The stoves had valves where the flue and air inlet passed through the insulation layer.
    If you build a Passive House that only requires heating in Dec and Jan and you put in a stove you will need to light it from Nov-Feb.
    .</blockquote>

    I was in a Passive House at 9 0'Clock one cold morning, the room with the sealed stove was 15 degrees while the rest of the house was 20 degrees, the stove was 8 degrees and acted as a cold radiator. VH posted 2012

    woodburning stoves
    • CommentAuthortony
    • CommentTimeNov 22nd 2011
     
    .
    • CommentAuthortony
    • CommentTimeAug 28th 2012
     
    Posted By: Viking House
    Are the baffels at roof level and are they able to stop convection currents rising and falling within in the chimney when the stove isn't lighting? i.e cold dense air dropping down the chimney onto the stove and light warm air rising up from the stove cooling it down.


    It would be interesting to try and quantify this effect but I haven't got a clue how to go about it. Any suggestions?
Add your comments

    Username Password
  • Format comments as
 
   
The Ecobuilding Buzz
Site Map    |   Home    |   View Cart    |   Pressroom   |   Business   |   Links   
Logout    

© Green Building Press