Tue, 19 Dec 2023 07:11:01 +0000 http://www.greenbuildingforum.co.uk/newforum/ Lussumo Vanilla 1.0.3 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14998 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14998 Tue, 21 Mar 2017 17:42:13 +0000 Sprocket I am in the South West (near Wells in Somerset, 15 miles south of Bristol).
I have the following:-

7 packs of Foamglas T4+ sintered glass insulation panel 450 x 600 x 100mm thick.
looks like there are 5 to a pack so 35 pieces altogether. All still sealed.

Some Foamglas Perinsul (peripheral block insulation)... an unused box of 10 blocks 100x100x450mm

+ a few leftover loose sheets of foamglass floorboard lying around:-
Looks like 6x 1200x600x60
And 2x 1200x600x80 but they are a bit chipped at edges


Anyone interested please msg me. I will ebay it in a week or so if no takers.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14820 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14820 Mon, 09 Jan 2017 15:42:01 +0000 PeterStarck
Flexible Water Pipe Conduit, ID 20mm, OD 25mm (~15m red & ~6m blue)

Nylon Polyamide Slit Convoluted Electrical Conduit, Hilcon LS32
ID 29.2mm, OD 34.5mm (50m roll)

Hilcon LS32 Slit External T Pieces (#48)

£50 or offer for the lot, collect only. Now £20

PM me if interested.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14951 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14951 Fri, 03 Mar 2017 15:27:30 +0000 PeterStarck
BAL Micromax2 Grout 12.5kg Colour Smoke (Light Grey)

Porcelain Tiles Travertine Effect, 708mm x 472mm, 6 Boxes, Coverage 1m² per Box

BAL Micromax2 Grout 10kg Colour Jasmine (Cream)

£20 the lot

Message me if interested]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14939 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14939 Sun, 26 Feb 2017 10:29:36 +0000 Antares http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14887 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14887 Thu, 02 Feb 2017 12:32:28 +0000 owlman German units, 18mm carcasses, drawerline base units, but easily changed to doorline, (with new doors), as there are no internal rail/partition, two blind corners for the bases.
Several tall wall units, with 2 x corners.
Doors are plain white slightly textured laminate with oak strips on each side and postformed top and bottom. Integrated eye level oven and fridge housings.
Many of the units are in unblemished condition,- certainly carcase wise.
Because of the fundamental quality of the kitchen it would easily respond to an upgrade, i.e. new soft close hinges, doors re painted if required. Existing worktop is laminate so maybe not worth bothering with unless needed.
I'm in N' Yorks.

Whisper me if interested.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14844 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14844 Wed, 18 Jan 2017 10:25:57 +0000 Nelsonscorner
Approx 100 sq m following domestic internal wall insulation with wood fibre boards. Location, Greenwich SE10.

Email me on roger@nelsonscorner.co.uk if interested or if you can recommend someone. Thanks]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14833 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14833 Thu, 12 Jan 2017 22:55:12 +0000 marsaday
Anyone interested. Free more than likely, but it would need taking down. I can send some pics if interested.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14832 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14832 Thu, 12 Jan 2017 22:53:43 +0000 marsaday
First set installed 2009, second 2010.

I am doing an extension this yr so don't need these doors any more.

Open to offers. I can send some photos and more info if you message me.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14777 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14777 Fri, 16 Dec 2016 09:00:38 +0000 kentishgreen
Typically I have run out of my Marmox blocks and as I will be having some heavy patio doors within the EWI layer, I need the necessary support to sit them on rather than brackets along the bottom or use of timber.

TIA,

KG]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14633 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14633 Thu, 20 Oct 2016 17:29:31 +0100 chippyclaus Water tight and in reasonable condition for 25 years old with working kitchen - 4 burner hob, oven, sink and fridge. Toilet plus shower; room gas heater + large butane bottle, electrics in use and working order.
Good size awning included.
Let me know if interested and I will forward photos.
£650 ono.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14700 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14700 Fri, 18 Nov 2016 10:17:34 +0000 Antares http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14439 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14439 Tue, 02 Aug 2016 09:54:14 +0100 TimSmall
As a result I have 170 easyslate 600mm spare (one box of 100, one box of 70). These will allow a slate or synthetic slate roof to go down to a pitch of 12 degrees, often handy for lean-to style extensions where the existing roof finish needs to be matched for planning reasons...

As a bonus, fibre-cement slates have about the lowest embodied energy of any man-made tile, is low weight, and low cost too.

http://www.roofingsuppliesuk.co.uk/easy-roofing/easy-slate-600mm/

... I didn't buy from these people, but that's an indicative price and description.

Happy to sell at 70p each (paid £1.10 each inc VAT I think). Happy to put them on a courier at cost.

I also have the associated Marley Thrutone slate too if anyone is in the are and want to pick up (Brighton).]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14364 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14364 Thu, 30 Jun 2016 11:52:45 +0100 djh
http://www.rightmove.co.uk/property-for-sale/property-54538021.html

http://www.cropthornehouse.co.uk/

Hope it's OK to post this. No connection, just a project I admire.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13622 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13622 Mon, 24 Aug 2015 13:11:35 +0100 Beau
Xs 1.27M wide X 6.3M http://safeguardstore.co.uk/oldroyd-xs-slimline-drainage-membrane/

Xv clear 2.070M wide X 9.7M http://safeguardstore.co.uk/oldroyd-xv-clear-studded-membrane/

100 Brick plugs (plain ones) http://safeguardstore.co.uk/oldroyd-membrane-fixing-brick-plugs/

8M of sealing rope http://safeguardstore.co.uk/oldroyd-membrane-sealing-rope/

40M of sealing tape http://safeguardstore.co.uk/oldroyd-double-sided-membrane-sealing-tape/

Best part of a roll of the 200mm overseal tape http://safeguardstore.co.uk/oldroyd-membrane-overseal-tape/

£50 the lot. Dread to think what it would all cost new but can't face messing around with Ebay

Beau 01822 852933]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13710 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13710 Fri, 09 Oct 2015 15:12:09 +0100 djh
I'm looking for stone that is OK to be visible and such that it won't fall out of the baskets.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14242 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14242 Fri, 06 May 2016 18:29:42 +0100 Triassic http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14240 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14240 Thu, 05 May 2016 22:59:14 +0100 kentishgreen

http://www.secondsandco.co.uk/#!product-page/c1n8h/b1931209-2a0e-6198-27c1-bfc3ed3b4b68]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14186 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14186 Sun, 17 Apr 2016 09:39:48 +0100 ab0apm
thanks]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14166 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14166 Sun, 03 Apr 2016 19:34:04 +0100 yclairejenkins They would make a lovely glazed extension if they couldn't be incorporated into a new build.
Could be collected from Hereford or delivery arranged.
Please PM me with an offer or for more info.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14108 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14108 Thu, 10 Mar 2016 04:45:40 +0000 krisho
I have HUMIDITY / TEMPERATURE / WET & DRY BULB DIAGNOSTIC ANALYSER for sale, which is an ideal tool for critical superheat calculations.

Brand new item, never used. RRP £240

Pirce £130 with free postage or collection.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14099 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14099 Mon, 07 Mar 2016 16:54:31 +0000 HandsOn
For full details see latch.org.uk/jobs

------------------------------ Project and Volunteer Manager ---------------------------------------------
Hours: 37 hrs per week

Monday to Friday: 9:00am – 4:30pm

Salary: £26,491 – £27,357 + 5% pension

Closing date: Monday 4th April 2016 – Midday

Interviews: Monday 11th April 2016

Latch requires an experienced worker to manage domestic refurbishment and other construction projects along with managing a programme of volunteer participation in these projects.

This is an exciting opportunity to join a dynamic team delivering a unique programme with far reaching benefits to many.

Experience of construction project management and working with volunteers or trainees is essential.

A full driving licence is required.

NO CVs accepted.

--------------------------Refurbishment and Training Worker----------------------------------------
Hours: 37 hrs per week

Monday to Friday: 9:00am – 4:30pm

Salary: £24,831 – £25,641 + 5% pension

Closing date: Monday 4th April 2016 – Midday

Interviews: Tuesday 12th April 2016

Latch requires a skilled and experienced worker to refurbish empty properties with volunteers and trainees. This is an exciting opportunity to make a difference to the lives of unemployed people who gain skills working on the empty properties and homeless people who move into the finished houses.

Experience of training and supervising people with a range of skills and support needs as well as working in the refurbishment or building trade are essential.

A full driving licence is required.

NO CVs accepted.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14031 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14031 Fri, 05 Feb 2016 11:18:54 +0000 shuff27
Collection from south northants, not worth posting as they weigh about 6kg each.

Trade price was around £20 incl. VAT each - any reasonable offer accepted (i.e. going very cheap)!]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14032 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14032 Fri, 05 Feb 2016 11:22:31 +0000 shuff27
Collection from south northants.

Going very cheap as I want to clear out all my leftover selfbuild stuff - more to come!]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14035 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14035 Sun, 07 Feb 2016 19:20:42 +0000 rhamdu
Gyplyner system parts:
Six 3.6m lengths of Gyplyner GL1 channel (metal studs)
Approx 100 Gyplyner 295mm GL9 brackets
Approx 70 Arthur Hough AH175 brackets 395mm (GL12 equivalent)

Plaster beads:
Six 3m lengths of thin coat galvanised angle bead
Also approx 2m galvanised edge bead

£40 or offers]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14003 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=14003 Tue, 26 Jan 2016 09:29:32 +0000 shuff27
3 x Heatmiser PRT-E V3 programmable thermostats (mains connection), boxed

1 x Heatmax wiring centre, 4 zone, boxed

1 x Heatmax wiring centre extension, 4 zone, boxed

24 x Heatmax manifold zone actuator 230V (11 still boxed, 13 unboxed)

All items unused & about 3 years old. Will try to answer any queries, although I'm not an UFH expert!]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13922 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13922 Fri, 01 Jan 2016 15:11:19 +0000 mike7 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13686 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13686 Tue, 29 Sep 2015 14:59:58 +0100 juniorjames
After a recent MVHR self install, I have some ducting left over:

2 x 50m Rolls of 75mm semi rigid blue duct - looking for £150 per roll

Getting in the way now, so would be good to see them gone!

Could deliver in west Sussex area for a small cost.

Cheers]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13869 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13869 Sat, 05 Dec 2015 16:12:07 +0000 Nick Parsons
I teach Segal-style building, and I recommend this book to my students. I'd like to get hold of a few copies to lend out. Anyone want to sell me one?]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13865 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13865 Thu, 03 Dec 2015 15:48:16 +0000 RoseMill_DandR Builder to oversee the renovation of a change of use project in Todmorden, w Yorkshire. Project has been started but is beginning to drift due to inexperience. Project is an 1896 mill/warehouse building.

We have planning permission, architects plans up to building regs and quotes from some contractors for parts of the work. We would like to work with someone who can oversee the next stage which involves some building work and several different contractors or trades. We would like to be involved but feel we do not have enough time or experience to do this efficiently.

Start soon preferred. Local preferred.
Call 07944 619632]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13838 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13838 Wed, 25 Nov 2015 09:54:35 +0000 tony
30 tubes all intact, thermal sensor needs replacing, ex Navitron 5 yrs old replaced with PV.

First come gets it.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13799 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13799 Thu, 12 Nov 2015 22:24:48 +0000 mike7
It would be helpful if I could get the two sheets superimposed one on the other - the best I can do at the moment is to print them both out on the same sheet of paper and then scan/photo that. A bit laborious and not too pretty either. Any ideas that a computer dummy would be able to take in?]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13776 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13776 Tue, 03 Nov 2015 20:31:34 +0000 Victorianeco
I may possibly consider selling these for the right price:

600 x 1200, unused but fitted.

500 x 1200, unused but a few scratches, grille is a little bent

500 x 1000 Designer flat panel, unused. Requires feet

Anyone interested?]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13766 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13766 Fri, 30 Oct 2015 16:04:03 +0000 PeterStarck http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13665 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13665 Tue, 15 Sep 2015 21:24:36 +0100 tony http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13570 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13570 Wed, 05 Aug 2015 19:55:01 +0100 baschurchbill http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13361 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13361 Tue, 12 May 2015 12:49:06 +0100 stevenday
I have a whole host of Unger Diffutherm insulation/plastering products for sale. I bought a job lot of these on eBay from someone who had them left over from a job, and after taking what I need to finish internally insulating my cottage, I have a lot left too!

Normally these are all quite eye-wateringly expensive, but it is a great system, so hopefully these can go to a good home and help make it a bit cheaper for someone else. If you have any questions about it, please ask - we've done 25 sqm so far, and are planning another 50 this summer.

The items:
- 10 x 20mm wood fibre reveal insulation boards. £3.00 each http://www.ebay.co.uk/itm/161699317477
- 30 x 25kg bags of vapour control lime plaster. £15 each http://www.ebay.co.uk/itm/161699282100
- 15 x 2.5m Interior render/window edging strips. £2.00 each http://www.ebay.co.uk/itm/161699312038
- 80 x Window/Door corner strengthening mesh. £5.00 for 10 http://www.ebay.co.uk/itm/161699298039
- 40 x 2.5m Corner profile mesh. £1.00 each http://www.ebay.co.uk/itm/161699308656
- 6 x Boxes of unused 140mm fixings. £50 a box http://www.ebay.co.uk/itm/161699321691
- 2 x Boxes of unused 160mm fixings. £50 a box http://www.ebay.co.uk/itm/161699328993
- 2.5 x Boxes of used 140mm fixings with new rawl plugs. £30 the lot http://www.ebay.co.uk/itm/161699331246
- 3 x 25kg tubs of wood fibre insulation glue. £50 a tub http://www.ebay.co.uk/itm/161701721222

Obviously some of this is quite specific to the Unger Diffutherm system, but I think a lot of it could be re-used with other things - the mesh and plaster for example. Note also that you can use this internally or externally.

They're all on eBay as individual product listings, so that you can buy as much or as little as you need, but obviously if someone wanted to take the whole lot off my hands, that would be great.

Mostly collection only as it's either too big/bulky or heavy to post anywhere. I'm happy to deal with couriers/pallets though if you want to send someone to collect it.

We're on the Devon/Somerset border, 5 mins from J27 of the M5.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13360 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13360 Tue, 12 May 2015 08:52:12 +0100 Nick Parsons
Nick]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13340 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13340 Mon, 04 May 2015 21:20:39 +0100 muddy Also advertised at http://www.gumtree.com/p/bricks-blocks-lintels/chimney-flue-blocks.-scheidel-isokern-/1112572395
Offers considered.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13335 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13335 Fri, 01 May 2015 12:34:56 +0100 MikeD This Vigas is eligible for the RHI and is in very good working order, having run without any issues since new. Also available is it's Laddomat.
We will consider any sensible offer.
Contact 07701087979]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13314 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13314 Sun, 26 Apr 2015 18:21:19 +0100 markocosic
I have three Amphiro A1 water meters available:

http://amphiro.com/products/a1/

They're powered by the water flow and tell you the volume/energy content of the hot water used. (designed for showers)

Two used but in good working order - £20 each posted. One brand new. £35 posted.

Drop a note to marko@cosic.org.uk to buy. :-)

--
Marko]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=10159 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=10159 Tue, 19 Feb 2013 13:17:37 +0000 Triassic
Loads of scaffold poles, clips and tubes and 60 tubs of lime putty!]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13283 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13283 Thu, 09 Apr 2015 15:30:27 +0100 owlman http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13277 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13277 Tue, 07 Apr 2015 20:19:35 +0100 owlman This is just the box; dimensions are 3900mm long x 253mm wide x 149mm deep.
Finned emitters and grilles are readily available.
It's brand new still in its unopened packaging.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13253 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13253 Mon, 30 Mar 2015 11:29:12 +0100 owlman http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13239 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13239 Tue, 24 Mar 2015 21:42:19 +0000 JennyA 100mm thick.
600mm wide
2 rolls per pack
5m per roll
pack area 6m2
paid £19.17 +vat per pack prepared to accept £15.00 per pack, buyer collects.

Also 16 wool wood boards .... any offers ?.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13164 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13164 Tue, 03 Mar 2015 09:57:22 +0000 newzeal Nigel]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13112 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13112 Sat, 14 Feb 2015 12:50:25 +0000 snyggapa
http://www.salvo.co.uk/essex/flooring/reclaimed-parquet-flooring-8m2-muhuhu-wood-x84152x1.html

and more pics here. seems to have already had the bitumen removed but I am not an expert !

https://plus.google.com/photos/114266060510111771379/albums/6043043031168789441

free to anyone who can collect from Essex near M25/lakeside

-Steve]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13039 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13039 Wed, 28 Jan 2015 13:03:06 +0000 Gervase-Cooke
After completing my retrofit I have a lot of stuff left over that is taking up valuable space.
The list is not exhaustive but has the main items.
I'd really like to get rid of it as a job lot. Its several hundred pounds worth. I'll take a sensible offer (or maybe even a silly one). Maybe could even deliver within reasonable radius of Manchester for an agreed fee.

4 whole 60mm Diffutherm boards plus off cuts with tongue or groove on. At least 5m2.
1 40mm diffutherm reveal board
3 batts of 50mm pavaflex
1 tub of Baumit Silikat top coat render in a fetching grey (can be painted) (coverage 7m2)
approx 20m2 mesh
1 2.5m aluminium white powder coated 100mm overcill extension plus few shorter off cuts
various full length beads, stop rails, corner mesh, apu rails etc
2 sheets of Armacell 19mm insulation
2 lengths of Airflex pro approx 6m each
Various connectors grilles etc for 3" and 5" ventilation ducting

The tongues and grooves of the diffutherm boards are not perfect but as they were delivered to me and I had no problems.
There's pretty much everything you'd need to do a small 5m2 external job except base coat render and fixings.
Though a bit complex its a good system to work with.

Whisper me if you are interested.

Thanks

Gervase]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13020 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=13020 Thu, 22 Jan 2015 11:15:21 +0000 mike7
I'm near Rickmansworth close to J18 of the M25, Give me a whisper if you're interested. It's not more than about 4'6 long and the cast iron legs can be removed along with other bits to make it light enough for two to shift easily.]]> http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12932 http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12932 Fri, 26 Dec 2014 13:24:09 +0000 chippyclaus At Ejot I can only buy a box of 100, but could just do with 30-40 pieces. Has anyone got that amount spare or knows of another outlet, which will sell this quantity?]]>